Replacement Lid Valve

Anmeldelser for Replacement Lid Valve

Gjennomsnittlig stjernerangering 5 av 5 stjerner

5,0

(1 anmeldelse)

Et produkts stjernerangering beregnes som et gjennomsnitt av alle dets vurderinger.

Kjøp nå
Logoen til HOTBIN Composting

Selges av HOTBIN Composting

www.hotbincomposting.com

•

888 Anmeldelser

4,7

Informasjonen her er utelukkende basert på produktvurderinger på Trustpilot fra kundene til HOTBIN Composting.

Dette har kundene trukket frem

Kvalitet

4,0

1 vurdering

Verdi for pengene

3,0

1 vurdering

Produktdetaljer

The valve is made from expanded polypropylene (EPP); the same material used to manufacture the rest of the HOTBIN unit. The valve snuggly fits into its recess on the raised lid panel but occasionally they can be removed or damaged by a crafty squirrel or bird. For best results, ensure that the valve is opened in the correct direction - push down on the back of the valve. Open the valve to approximately 2mm, this is sufficient enough to allow the water vapour to escape but not enough to allow unwanted odours to escape. Once set to 2mm open, the valve should not be adjusted.
  • Merkevare: HOTBIN Spares
Rapporter dette produktet

Alle anmeldelser

Vurdert til 5 av 5 stjerner

The birds took it within 24 hours

Kvalitet: 4
Verdi for pengene: 3
Logoen til HOTBIN Composting

Svar fra HOTBIN Composting

We’re sorry to hear that some birds took a shine to your HOTBIN valve and you have had to replace it so soon after your bin arrived. To prevent this happening again, if you think it needs addressing you could place a square of chicken wire or similar over the valve. We'll feed this back to the design team. Thanks

The HOTBIN Team